A KFV reverse action bottom shootbolt for use with multipoint locks with serrated drive rods. The overall faceplate length is 180mm, the width is 16mm and the throw of the shootbolt is 22mm. A shootbolt keep is not supplied and can be ordered separately, see below ordering code for the associated keep. RD55185X – Shootbolt keep
This part is discontinued and is no longer available. However, for part AS200035: AS230035 is a potential alternative. This replacement lock has pins rather than deadbolts. The pins are in the same position as the original and it should be possible to retain the existing keeps. For part AS2000UR35: AS2300UR35 is a potential alternative. Again,…
DISCONTINUED BY MANUFACTURER This lock features 1350mm between the hooks and can accept shootbolts. This lock has been discontinued by the manufacturer but we still have stock available. Operation: Lift lever Latch reversal: Depending on date of manufacture either: (1) Push in the latch and undo the screw in the back of the lock case,…
This KFV Lever multipoint door lock features 2 Rollers, 2 Hooks, 1 Deadbolt & 1 Latch. Identifying a KFV multipoint door lock is sometimes difficult. Early models did not feature a stamp on the faceplate but, thankfully, any locks produced in the last few years do feature the KFV logo. We’d always recommend removing the…
This part is discontinued and is no longer available. However, for part AS490045: 1504653 is a potential alternative. Same hook positions and functions. Part: KFVCASE45 is also a potential alternative. As this lock is discontinued, we’d recommend a replacement gearbox. If a full, replacement lock is required, a VERSA V-MPL repair lock can be used….
This part is discontinued and is no longer available. However, part: AS230035 is a potential alternative. This replacement is a close match but has no hooks. The pins are in the same position. Identifying a KFV multipoint door lock is sometimes difficult. Early models did not feature a stamp on the faceplate but, thankfully, any…
This part is discontinued and is no longer available. However, part: AS435035 is a potential alternative. This replacement features pins instead of hooks and anti lift pins. They are in the same positions but keeps will need adjusting to accept the pin positions. KFV Latch Deadbolt 2 pin bolts, 2 hook lock with a lift…
This KFV Lever multipoint door lock features 2 Hooks, 1 Deadbolt & 1 Latch. KFV Latch Deadbolt 2 hook lock with a lift lever function and serrations for attaching shootbolts at the top and bottom of the door. KFV are one of the few brands that use rivets to attach locking points to the strip…
This KFV Key Wind multipoint door lock features 2 Pin Bolts, 1 Deadbolt & 1 Latch. Identifying a KFV multipoint door lock is sometimes difficult. Early models did not feature a stamp on the faceplate but, thankfully, any locks produced in the last few years do feature the KFV logo. We’d always recommend removing the…
This part is discontinued and is no longer available. However, part: AS825045 is a potential alternative. This is a tricky lock to replace because of the unusual locking positions and key wind operation. The simplest swap is to a KFV 4 roller key wind lock. New keeps will be required and its worth noting that…
This part is discontinued and is no longer available. However, for part AS435025: FU856T825 is a potential alternative. This alternative has 2 additional rollers, so additional keeps are required. For part AS435030: FU856T130 is a potential alternative. This has 2 additional rollers, so additional keeps are required. Otherwise, the lock is a good match with…
This KFV Lever multipoint door lock features 2 Pin Bolts, 1 Deadbolt & 1 Latch. Identifying a KFV multipoint door lock is sometimes difficult. Early models did not feature a stamp on the faceplate but, thankfully, any locks produced in the last few years do feature the KFV logo. We’d always recommend removing the multipoint…
This KFV Lever multipoint door lock features 2 Pin Bolts, 1 Deadbolt & 1 Latch. Identifying a KFV multipoint door lock is sometimes difficult. Early models did not feature a stamp on the faceplate but, thankfully, any locks produced in the last few years do feature the KFV logo. We’d always recommend removing the multipoint…
This KFV Lever multipoint door lock features 2 Rollers, 1 Deadbolt & 1 Latch. A KFV Latch Deadbolt 2 roller lock with a lift lever function and serrations for attaching shootbolts at the top and bottom of the door. Identifying a KFV multipoint door lock is sometimes difficult. Early models did not feature a stamp…
This part is discontinued and is no longer available. However, part: AS47139 is a potential alternative. There is no direct replacement for this KFV lock. If you wish to retain 4 hooks and 4 rollers, the closest alternative is the Mila AS47139. A fair amount of work will be required as the Mila gearbox is…
This KFV Key Wind multipoint door lock features 4 Rollers, 1 Deadbolt & 1 Latch. Identifying a KFV multipoint door lock is sometimes difficult. Early models did not feature a stamp on the faceplate but, thankfully, any locks produced in the last few years do feature the KFV logo. We’d always recommend removing the multipoint…
This KFV Lever multipoint door lock features 4 Rollers, 1 Deadbolt & 1 Latch. Identifying a KFV multipoint door lock is sometimes difficult. Early models did not feature a stamp on the faceplate but, thankfully, any locks produced in the last few years do feature the KFV logo. We’d always recommend removing the multipoint from…
This KFV Passive multipoint door lock features no locking points and is suitable for the passive door on a pair of French doors. Operation: Lift Lever To lock the door 1. Lift the handle upwards to engage the locking points. 2. Lock the locking points and main deadbolt (if present) by turning the key. To…
In order to provide you a personalized shopping experience, our site uses cookies. By continuing to use this site, you are agreeing to our cookie policy.