This is the automatic locking gearbox from the Fuhr range. Please note that these gearboxes cannot be interchanged with regular Fuhr gearboxes. Fuhr 833 multipoint gearboxes are available in a large range of backsets including 35mm, 40mm, 45mm, 55mm, and 65mm, some of which may be available by special order. These gearboxes feature a deadbolt…
A Fuhr normal action bottom shootbolt for use with Fuhr multipoint locks with serrated drive rods. The overall faceplate length is 150mm, the width is 16mm and the throw of the shootbolt is 22mm. A shootbolt keep is not supplied and can be ordered separately, see below ordering codes for the associated keep and equivalent…
A Fuhr normal action bottom shootbolt for use with the Fuhr centre section multipoint locks with stock codes beginning ‘FU98Z5’ only. The overall faceplate length is 570mm which can be cropped down to 370mm, the width is 16mm and the throw of the shootbolt is 22mm. A shootbolt keep is not supplied and can be…
This Fuhr gearbox features a keywind mechanism. Be sure to remove the yellow plastic travel protector before fitting. Fuhr multipoint door lock gearboxes feature a deadbolt that throws 20mm, except on 25mm and 30mm backset locks, where it throws 14mm. The gearbox measures 220mm x width + 18mm. The latch and deadbolt are both 31mm…
Fuhr multipoint door lock gearboxes feature a deadbolt which throws 20mm, except on 25mm and 30mm backset locks, where it throws 14mm. The gearbox measures 220mm x width + 18mm. The latch and deadbolt are both 31mm high and there is 61mm between the bottom of the latch and the top of the deadbolt. Gearboxes…
Fuhr multipoint door lock gearboxes feature a deadbolt which throws 20mm, except on 25mm and 30mm backset locks, where it throws 14mm. The gearbox measures 220mm x width + 18mm. The latch and deadbolt are both 31mm high and there is 61mm between the bottom of the latch and the top of the deadbolt. Gearboxes…
These Fuhr hook keeps are designed for use on timber and composite doors. With a 24mm wide and 120mm long faceplate, these keeps have rounded edges. Supplied in singles.
Fuhr Large Hook Case Only Suitable to Replace Top or Bottom Case Fixed by Screws – Not Supplied Please note these are reconditioned parts – all are cleaned and tested as working however they may show signs of wear and tear.
This Fuhr 856 – Lift Lever multipoint door lock features 2 Hooks, 1 Deadbolt & 1 Latch. Fuhr 856 series multipoint door locks are most commonly fitted to UPVC doors but suit all door types. These UPVC door locks feature a solid spindle, lift lever (Fuhr call it lever operated) function, where the handle must…
This Fuhr 859 – Split Spindle multipoint door lock features 2 Hooks, 1 Deadbolt & 1 Latch. This Fuhr multipoint lock is designed for doors that require a split spindle nightlatch operation. With a 45mm backset, this multipoint has a 20mm faceplate with rounded ends. Please note that there are no serrations to accept shootbolts…
This Fuhr 855 – Key Wind multipoint door lock features 2 Rollers, 2 Hooks, 1 Deadbolt & 1 Latch. Fuhr 855 series multipoint door locks suit all door types. These multipoint or UPVC door locks feature a key wind (key operated) function but are otherwise the same as the equivalent 856 or 859 versions. <…
This Fuhr Passive multipoint door lock features no locking points and is suitable for the passive door on a pair of French doors. Fuhr passive door locks suit the passive leaf on a pair of hinged, French doors. These locks are non handed and can be used on either a left or right hand door….
This part is discontinued and is no longer available. However, part: 65450085AA is a potential alternative. This lock is a different brand, but offers the same functionality. That means that new shootbolts will be needed – use part number 565085
Fuhr Pin Bolt Case Only Suitable to Replace Top or Bottom Case Fixed by 2 Screws – Not Supplied Please note these are reconditioned parts – all are cleaned and tested as working however they may shows signs of wear and tear.
This part is discontinued and is no longer available. However, part: G1376522 is a potential alternative. Some re-positioning of the locking points is required, existing keeps will have to be moved. Replace existing handles with handles that have 70PZ.
This part is discontinued and is no longer available. However, for part FU98Z525: FU856T125 is a potential alternative. This is the same lock but the full length version, rather than 2 part. For part FU98Z530: FUHRCASE30 is a potential alternative. As this lock is discontinued, we’d recommend a replacement gearbox. If a full, replacement lock…
In order to provide you a personalized shopping experience, our site uses cookies. By continuing to use this site, you are agreeing to our cookie policy.