This Kenrick Excalibur multipoint door lock features 4 Rollers & 1 Latch. This Kenrick lock features a latch, hook, 4 rollers and a double spindle nightlatch function. Identifying a Kenrick Excalibur multipoint door lock can be tricky as there are a number of other manufacturers with very similar gearboxes. If your lock is still in…
This is the double-spindle version of the Kenrick gearbox. Both followers are sprung so you have the option of using sprung or unsprung door handles. Kenrick Excalibur gearboxes are available with either a single or double spindle (follower) gearbox. They will have centres at either 92mm or 62mm and 92mm. Both followers are sprung so…
This is the single spindle version of the Kenrick passive gearbox for use on French doors and featuring a sprung spindle. Kenrick Excalibur gearboxes are available with either a single or double spindle (follower) gearbox. They will have centres at either 92mm or 62mm and 92mm. Both followers are sprung so you have the option…
This Kenrick Excalibur multipoint door lock features no locking points and is suitable for the passive door on a pair of French doors. Identifying a Kenrick Excalibur multipoint door lock can be tricky as there are a number of other manufacturers with very similar gearboxes. If your lock is still in the door, it’ll likely…
These Kenrick full-length keeps are designed to suit Kenrick multipoint locks with 3 rollers and two hooks and anti-lift pins. This full-length keep has 3 roller, 2 hook and anti-lift pin keeps inbuilt. Supplied in singles, these keeps are handed. Handing Charts Standing outside looking at the door Standing Outside, Door Hinged Door Opens Handing…
A KFV reverse action bottom shootbolt for use with multipoint locks with serrated drive rods. The overall faceplate length is 180mm, the width is 16mm and the throw of the shootbolt is 22mm. A shootbolt keep is not supplied and can be ordered separately, see below ordering code for the associated keep. RD55185X – Shootbolt keep
KFV cases are riveted onto strips and need to be drilled and then re-riveted. These cases will only replace newer KFV locks as older versions have different connectors. KFV multipoint door lock gearboxes are single spindle and 92mm centres. The overall height of the gearbox is 210mm, the bolt throws 21mm and the distance from…
KFV cases are riveted onto strips and need to be drilled and then re-riveted. These cases will only replace newer KFV locks as older versions have different connectors.KFV cases are riveted onto strips and need to be drilled and then re-riveted. These cases will only replace newer KFV locks as older versions have different connectors….
KFV multipoint gearboxes are riveted onto strips and need to be drilled and then re-riveted. These gearboxes will only replace newer KFV locks as older versions have different connectors. To lock the door 1. On closing the door, the latch and locking points are automatically engaged as the triggers on the door connect with the…
KFV Hook Case Only Suitable to Replace Top or Bottom Case Fixed by 3 Rivets – Not Supplied Rivet size required is 3.2 x 10.8mm Please note these are reconditioned parts – all are cleaned and tested as working however they may show signs of wear and tear.
This part is discontinued and is no longer available. However, for part AS200035: AS230035 is a potential alternative. This replacement lock has pins rather than deadbolts. The pins are in the same position as the original and it should be possible to retain the existing keeps. For part AS2000UR35: AS2300UR35 is a potential alternative. Again,…
DISCONTINUED BY MANUFACTURER This lock features 1350mm between the hooks and can accept shootbolts. This lock has been discontinued by the manufacturer but we still have stock available. Operation: Lift lever Latch reversal: Depending on date of manufacture either: (1) Push in the latch and undo the screw in the back of the lock case,…
This KFV Lever multipoint door lock features 2 Rollers, 2 Hooks, 1 Deadbolt & 1 Latch. Identifying a KFV multipoint door lock is sometimes difficult. Early models did not feature a stamp on the faceplate but, thankfully, any locks produced in the last few years do feature the KFV logo. We’d always recommend removing the…
This part is discontinued and is no longer available. However, for part AS490045: 1504653 is a potential alternative. Same hook positions and functions. Part: KFVCASE45 is also a potential alternative. As this lock is discontinued, we’d recommend a replacement gearbox. If a full, replacement lock is required, a VERSA V-MPL repair lock can be used….
This part is discontinued and is no longer available. However, part: AS230035 is a potential alternative. This replacement is a close match but has no hooks. The pins are in the same position. Identifying a KFV multipoint door lock is sometimes difficult. Early models did not feature a stamp on the faceplate but, thankfully, any…
In order to provide you a personalized shopping experience, our site uses cookies. By continuing to use this site, you are agreeing to our cookie policy.